Solutions and tips for your washing machine

It is a fact that a malfunction in the washing machine would make your daily life quite difficult, as it is a valuable tool for every household. Knowing the importance and convenience it provides, we have gathered all the information you need to know in order to effectively deal with a malfunction – SERVICE ΕΠΙΣΚΕΥΕΣ ΠΛΥΝΤΗΡΙΑ ΑΘΗΝΑ – in your washing machine.

1. I have set the program normally, but the washing machine does not start washing

First, check if you have closed the door properly. Next, you need to press the program start button. If the problem persists, check that the water supply is open and unobstructed.

2. The washing machine “moves” during spinning. What could be wrong?

The most likely cause is that the legs of the device are not fixed. First of all, you should have taken care of the correct placement of the washing machine. This means that the mounting surface must be stable and flat. Otherwise, the feet of the device will not press evenly on the floor. Soft floor coverings are unsuitable, e.g. carpets.

Most washing machines have two adjustable legs on the front, with which the unevenness of the floor can be equalized. Turn the washing machine slightly backwards and, depending on the condition of the floor, adjust their washer feet. Then check the washing machine support fuse and repeat the process if necessary.

3. Strange noises and / or vibrations are heard

Noises at the beginning and end of water pumping are normal. Otherwise, check that the load you have put in the washing machine exceeds the recommended weight.

Depending on the program you have chosen and the clothes you have put in the bucket, the recommended weight varies. As well as when the load is small, the clothes move freely in the drum causing vibrations. These vibrations become particularly intense during the spin, where the washing machine takes the most turns.

Noise during washing can also come from coins or objects that have been forgotten in the pockets of some clothes.

4. He did not squeeze the clothes as usual with the result that they are very wet

The most probable cause is that an error occurred in the balancing of the clothes and the number of revolutions – during the final spin – decreased automatically. Check that the load you have put in the washing machine exceeds the recommended weight. If so, remove some clothing and activate the spin program.

Always place small and large clothes in the bucket together, in order to achieve a better distribution of the load.

5. I take the washed clothes out of the washing machine and they are full of foam

This usually means that a large amount of detergent has been used or the detergent is unsuitable. In any case, creating too much foam means inefficient washing. Carefully read the recommended detergent dosage and / or use a different detergent.

6. The clothes do not clean well with liquid detergent. What can I do wrong?

Liquid detergents usually do not contain bleach. That is why stains are not always removed, such as e.g. from fruit, coffee or tea. On the contrary, powdered detergents contain bleach. It is good to use a different detergent, depending on the washing needs. In any case, never put liquid detergent with bleaching powder in the case.

7. I used detergent powder and there are residues on the washed clothes

Powder detergents contain granules that do not dissolve in water to help soften it. These grains stick to the clothes. After drying the clothes, try to remove the residues with the help of a brush. It is also good to wash dark clothes with liquid detergents. These usually do not contain grains.

8. There is a lot of detergent residue left in the detergent compartment

The most likely cause is to have used detergent powder along with softener. Thoroughly clean the detergent case and in the future, always apply the detergent first and then the softener. If the problem persists, check if the filter is clogged in the water supply. Make sure you clean it at least once a month.

It is very important to remember…

All modern washing machines come with a display and / or special control lights to help you repair a fault. This means that you should read the instructions for use of your device carefully, so that you know how you can repair a fault and / or in which cases you should call a specialized technician . Find out today about the laundry repair service of 24gr.gr and its cost.

Tips to “shield” the washing machine from unpleasant odours

The detergent and softener is certainly necessary to be your clothes clean, soft and fragrant after each wash.

However, they are likely to cause bacteria to grow in the washing machine, causing the appliance to start to smell unpleasant. This “side effect” occurs more often in recent years, as low temperature programs are used more and more often , to prevent the slightest wear of clothes, but also to save electricity in washing. As soon as odours are created in the washing machine, they will start to pass into your laundry and thus it will stop exuding cleanliness.

However, you can easily keep odours away from your device and your clothes. All you need to do is follow the tips below, which will ensure that the washing machine will always remain clean and healthy.

Dry the appliance after washing

Each time the washing machine is finished , make sure to dry the parts that have moisture left. Wipe the door and the “drawer” of the detergent-softener with a soft and dry cloth.

Especially if your washing machine is front-loading , do not neglect the door hinge, thoroughly cleaning the crease at the bottom, where there is always a small amount of water left.

Always leave the door open

Bacteria grow in dark and humid environments, such as your bin once you take out freshly washed clothes. Therefore, after you “get” the moisture with a cloth, you should not close the door.

Instead, it should be left open on a permanent basis, like the detergent “drawer”, to ventilate the inside of the appliance.

Take off your clothes as soon as the program ends

Be sure to put a washing machine when you are sure that you will be home as soon as the program is over, to take the clothes out of the bin immediately. Otherwise, the humidity of the clothes, with the washing machine door closed, is an “ideal recipe” for the growth of bacteria.

Another reason to empty the tub immediately is that your clothes will not wrinkle too much when washed. Therefore, you have a double motivation not to start washing e.g. before you go to work or before you go to bed.

Pay attention to the dosage of the detergent

Instead of giving you better cleanliness, too much detergent can cause a lot of problems with your appliance and your clothes. First of all, it is possible that at the end of the program it is not completely dissolved and therefore a percentage of it remains in the bin, thus causing the development of bad breath.

If you abuse the detergent, its residues may also begin to accumulate in the pipes of the appliance, increasing the risk that not all the dirty washing water will “pass” into the drain, but part of it will return to the appliance. A scenario that, of course, also favours the growth of bacteria.

Take advantage of the high temperatures for disinfection

Use a high temperature program frequently to thoroughly clean the tub and piping. Preferably choose a program of 90 degrees Celsius, or generally with a temperature of not less than 60 degrees Celsius, adding a very small amount of detergent and, of course, without putting clothes in the washing machine.

The frequency with which you should use this appliance “maintenance” program depends on the number of washing machines you install. So, you have a family and you wash often, then it is good to use it once a month. If you wash more often, such a program of high temperatures every two months is enough.

Tag: ΥΔΡΑΥΛΙΚΟΙ ΑΘΗΝΑ